iglidur® G1 | The new lubrication-free standard - More than 113 dimensions, others at short notice upon request
- Two times longer service life at high loads
- Up to 4 times lower wear at low loads
- Long-term service temperature up to +180°C
- Pressfit up to +120°C (iglidur® G: up to +80°C)
- Moisture absorption reduced by 50%
With iglidur® G1, we offer a wear-resistant and versatile material for a wide range of applications. Recommended are applications with medium to high loads at medium speeds. Even at increased temperatures of up to 180°C, iglidur® G1 is dimensionally stable and wear-resistant and offers very low moisture absorption. This makes iglidur® G1 suitable for a variety of different applications and is therefore an all-rounder with very good running performance.
Typical application areas AutomotiveMachine toolsFurniture/Industrial designElectronic manufacturingFitness and sports You can find further applications here:
Industry solutions When to use it?- Economical all-round performance bearing
- For low to average surface speeds
- When the bearing needs to run on different shaft materials
- For oscillating and rotational movements
| When not to use it?- When mechanical reaming of the wall surface is necessary
iglidur® M250, sleeve bearing, mm - When the highest wear resistance is required
iglidur® W300, sleeve bearing, mm - When universal resistance to chemicals is needed
iglidur® X, sleeve bearing, mm - If temperatures are constantly higher than +180°C
iglidur® H, sleeve bearing, mm iglidur® X, sleeve bearing, mm iglidur® H370, sleeve bearing, mm - For underwater use
iglidur® H370, sleeve bearing, mm
|
Use our filter options to find the suitable product Tolerances and measurement systemThe installation dimensions and tolerances of the iglidur® plain bearings are a function of the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are imperative. Plain bearings with low moisture absorption can be designed with a minimal amount of tolerance. The rule for wall thickness: the thicker the wall of the bearings, the larger the tolerances must be.
Testing methods Assemblyiglidur® bearings are press-fit bearings. The inner diameter adjusts only after press-fit in the correctly toleranced housing The press-fit excess dimension can be up to 2% of the inner diameter. This ensures the secure press-fitting of the bearing. Axial or radial movement in the housing are also prevented.
iglidur® - assembling, gluing, machining
Certificates and standards