1. Very easy to fill - ideal for applications with pre-fitted plugs 2. Small pitch for quiet, smooth running 3. Limited torsional movement possible 4. Very low weight 5. "Push button principle" holds links together 6. Cable-friendly interior separation 7. Version E, filled along the outer radius 8. Version Z, filled along inner radius 9. Mounting bracket with integrated strain relief option
Available inner widths Bi: 10 to 20 mmAvailable bend radii R: 18, 28, 38 mmPitch: 20 mm/link = 50 links/m
* The required clearance height is HF = H + 10 mm (at 0.2 kg/m fill weight), which should be observed in all types of applications. Please contact us if you have particularly confined space requirements.
** The calculated length corresponds to the chain length without mounting brackets.
Overlapping on the opening mechanism, except for width 10 and 16 gap dimension 5.5 mm Special series with 3.5 mm gap: E06.10.018.0.S3 A=moving end, B=fixed endPitch: 20 mmChain links per m: 50Travel: SChain length = S/2 + K
The unsupported length depends on fill weightX axis: unsupported length in m FLB/FLGY axis: fill weight in kg/mLower scale: travel S in mFLB = unsupported with permissible sagFLG = unsupported with straight upper run
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
Mounting bracket with and without strain relief tiewrap plates
Other installation types
Plastic - one-sided
Data protection declaration