1. Torsional movements possible 2. Large pins - long service life 3. Cable-friendly interior 4. Mounting bracket with integrated strain relief option 5. Version E, filled along the outer radius 6. Version Z, filled along inner radius 7. Dirt-repellent outer contours 8. Very easy to fill 9. Available with 1, 2 or 3-chamber design (permanently injection-moulded multiple chamber design for cable separation) Series Z26 ) Series Z26.3 10. "Push button principle" holds links together
Available Inner widths: 2x48 mmAvailable bend radii R: 63 to 250 mmPitch: 56 mm / link = 18 links/m
* The required clearance height is HF = H + 35 mm (at 2 kg/m fill weight), which should be observed in all types of applications. Please contact us if you have particularly confined space requirements.
** The calculated length corresponds to the chain length without mounting brackets.
Crossbars overlapping on the opening mechanism A=moving end, B=fixed endPitch: 56mmLinks / m: 18Travel: SChain length = S/2 + K
The unsupported length depends on fill weightX axis: unsupported length in m FLB/FLGY axis: fill weight in kg/mLower scale: travel S in mFLB = unsupported with permissible sagFLG = unsupported with straight upper run
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
1 option and 8 bend radii
2 mounting bracket variants
Design specificationFurther information on "unsupported application"
Design specificationFurther information on "gliding application"
Other installation types
Fixed interior separation
Plastic - pivoting
Plastic - locking
Data protection declaration