1. Very easy to fill 2. Very small pitch for quiet, smooth running 3. Limited torsional movement possible4. "Push button principle" holds links together 5. Cable-friendly interior 6. Version E, filled along the outer radius 7. Version Z, filled along inner radius 8. Mounting brackets can be supplied 9. Available with 1 or 2-chamber design (permanently injection-moulded multiple chamber design for cable separation) Series Z045
Available inner widths Bi: 16 mmAvailable bend radii R: 18 to 38 mmPitch: 13 mm / link = 77 links/m
* The required clearance height is HF = H + 10 mm (at 0.1 kg/m fill weight), which should be observed in all types of applications. Please contact us if you have particularly confined space requirements.
** The calculated length corresponds to the chain length without mounting brackets.
Overlapping on the opening mechanism, except for width 7/7, gap dimension 22.214.171.124 mm A=moving end, B=fixed endPitch: 13 mmChain links per m: 77Travel: SChain length = S/2 + K
The unsupported length depends on fill weightX axis: unsupported length in m FLB/FLGY axis: fill weight in kg/mLower scale: travel S in mFLB = unsupported with permissible sagFLG = unsupported with straight upper run
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
Standard mounting bracket Series Z045
2 width and 3 bend radii
Fixed interior separation
Plastic - one-sided
Data protection declaration