The E2/000 ESD series is igus's fourth generation in this size. All our past experience went into this series: easy and versatile assembly combined with ruggedness - high strength paired with quiet operation, long cable life and many mounting options. The design is consistent across all E2/000 variants. It is the standard product for machinery around the world.
Available inner widths Bi: 15 to 80mmAvailable bend radii R: 38 to 145mmPitch: 33,3mm/link = 30 links/m
* The required clearance height is HF = H + 25 mm (at 0.5 kg/m fill weight), which should be observed in all types of applications. Please contact us if you have particularly confined space requirements.
** The calculated length corresponds to the chain length without mounting brackets.
Pitch: 33.3 mmChain links per m: 30Chain length= S/2 + KA = moving endB = fixed end
The unsupported length depends on fill weightX axis: unsupported length in m FLB/FLGY axis: fill weight in kg/mLower scale: travel S in mFLB = unsupported with permissible sagFLG = unsupported with straight upper run The diagrams for unsupported lengths apply to standard e-chains® made of igumid GLW material. The values can also be used for assessing e-chain® applications in ESD special material. If the respective maximum unsupported length exceeds 80%, the suitability of the e-chain® should be verified by a practical test.
From 10 m to max. 75 mChain length = S/2+K2Long travel - gliding (up to max. 75 m) Here the e-chain® is used with the upper run gliding on the lower run. We recommend letting our engineers support you when planning this type of system. In case of travel lengths between 4m and 10m, we recommend a larger unsupported e-chain®. A1 = moving endA2 = fixed end A3 = Guide trough with glide bar A4 = Guide trough without glide bar A5 = Total length of the guide trough
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
6 widths and 6 bend radii
Steel mounting bracket for all chain widths
Mounting bracket with tiewrap plate
Practical tool for opening and closing of e-chains® of series E2/000
Other installation types
Option 1: standard
Option 1 - Standard ESD separator For all applications. Provides maximum retention force and secure stability. As standard separators should be fitted every 2nd e-chain® link. Other shelving elements available upon request.
Plastic - pivoting, two-piece
Steel - locking
"Super-aluminium", "Basic" guide trough
1. Trough side part, aluminium, 2m
2. Glide bar, plastic, 2m
3. Plastic glide strips*, side, 2m
4. Clamping shoe, aluminium
5. C-profile, galvanised steel
6. Screw M6 x 16
7. Sliding nut M6
8. "Basic" connector, plastic
10. Silencer profile, rubber
*without glide strips upon request
"Super-aluminium" trough - the igus® standard for guide troughs
The "Super-aluminium" trough is a modular system of guide troughs for long travels (where e-chains® glide on each other). The basic "Super-aluminium" trough is available in simple, cost-effective "basic designs" and can be expanded for sophisticated plant construction. This universal usability makes it the recommended igus® standard for guide troughs.
Design specificationFurther information on "gliding application"
1. Interface connector
2. Plastic glide bar
3. Clamping shoe
4. Glide strips
Data protection declaration