1 from 2
igus-icon-lupe
igus-three-dimensional-model
- Part number: J3FI-0203-03
- Material: iglidur® J3
- Shape: Flanged bearings
- Dimensions:
- d1 0.125 inch
- d2 0.1875 inch
- d3 0.312 inch
- b1 0.1875 inch
- b2 0.032 inch
- Adjust dimension
- Manufacturing method: Injection moulding
- Service life:
- Excellent wear resistance at room temperature
- Very good wear resistance at medium temperatures
- Excellent friction coefficients
- Low moisture absorption
- Good wear resistance under water
- High media resistance
- Resistant to edge pressure
- Resistant to shocks and impacts
- Resistant to dirt and dust
iglidur® J3 | The new endurance runner: Specialist for pivoting and pulsating loads
iglidur® J3 is a material with improved wear resistance at low to medium loads and high speeds. The service life is up to 300% higher than that of iglidur® J, the proven top endurance runner material.
Typical application areas
- Vending machinery
- Printing industry
- Beverage industry
- Glass industry
- Aviation
When do I use it?
- When the wear resistance of iglidur® J rotating or pivoting is to be further optimised
- When very low coefficient of friction is required in dry operation
- When high wear resistance at low load is sought
- When low moisture absorption is required
- When good media resistance is required
When do I not use it?
- If a wear-resistant material is required for linear strokes
- If temperatures permanently higher than +90°C occur
- If radial surface pressures greater than 45MPa occur
Unsure if it fits?