My contact person
e-chains®, chainflex®, cables, harnessed systems readychain®

Hennlich OOD | Хенлих ООД

+359 32 511326
dry-tech® bearing technology

Hennlich OOD | Хенлих ООД

+359 32 511326

Bonding agent for tribo-filaments

  • Ideal for tribo-filaments iglidur I150, iglidur I180 and iglidur I180 BL
  • Good adhesion of the parts on the print bed
  • Easy detachment
Product description
The igus adhesion agent for iglidur tribo-filaments offers secure adhesion of the component on the print bed, but also ensures easy detachment after printing. The adhesion agent (powered by Magigoo) was developed as a simple solution especially for the iglidur tribo-filaments to improve the adhesion of these filaments on different printing plates. It is easy to apply and can be removed with warm water without residue at any time.
 
Application:
  • Lightly tap the bottle a few times on the print bed to activate the flow of the adhesive agent (do not press on the bottle)
  • Spread the adhesive agent over a large area or the required area and allow to dry. The yield of a bottle can be increased by economical application
  • After the printing process, wait until the print bed has cooled down - then the components detach themselves from the plate
  • The adhesive agent should be refreshed with a damp cloth or reapplied between printing processes
Technical data
Downloads