YE.32 energy chain series

[Designstudie]
Maximum stability for smaller installation spaces

#compact

Expansion of the successful YE product range. igus compact hybrid chains (best mix of plastic and steel) in the size with an inner height of 28mm and now also 32mm. YE e-chains and e-tubes are the ideal energy supply systems for machines with "inclined axes".

Enquire about the YE.32 energy chain now

Tech up

Maximum strength: steel links absorb the force of the fixed plastic inner/outer link stop-dogs

Cost down

Quick and easy installation thanks to the plug-in system. No screws or rivets are required

Proof

YE(HD): Fill weights of up to 50kg/m

Sustainability

Have your energy chain recycled at the end of its life cycle in the igus Chainge® recycling programme. Irrespective of the manufacturer: igus.eu/Chainge

Order a free sample

Order a free sample of YE and see the quality of the product for yourself.

Order now

Order now

Realised in practice

Hybrid tube YRHD in use at DWK Drahtwerk Köln as a replacement for steel tube

High stability and considerable fill weight - both requirements of the DKW Drahtwerk Köln have led to the selection of the hybrid chain YRHD.108.25.500.0 (tube variant) for implementing the unsupported travel of 12.5m with a fill weight of 28kg/m. The lids and shelves of the energy tube can be opened so that it is possible to add or replace cables later.

Two YE.42 side-by-side hybrid chains replace a steel chain at Sinopec

In steel chains, the built-in hydraulic hoses of this power catwalk application wear out very quickly, so that an alternative was sought. As the YE.42 hybrid chain consists of steel side plates that ensure an unsupported length that is approx. 100% longer (compared to plastic chains of the same size) and as the plastic links that have proven themselves for more than 35 years are used as crossbars, the YE series hybrid chain solves the customer's wear problem.

YE.42 hybrid chains for retrofitting a Genie work platform

The YE.42 series with a chain length of 7.5m is used in a Genie work platform. It functioned flawlessly after installation. The engineers on site particularly emphasised the ease of installation. It took much longer to remove the existing steel chain than to install the new YE hybrid energy chain, which was done within an hour in this application.

YE.32 energy chain series