My contact person
e-chains®, chainflex®, cables, harnessed systems readychain®

Hennlich OOD | Хенлих ООД

+359 32 511326
dry-tech® bearing technology

Hennlich OOD | Хенлих ООД

+359 32 511326

Module Connect

Save time and space with smart connector modules

The Module Connect is a new kind of plug-in connector for the connection of electric cables, fibre-optic cables and pneumatic hoses. It is characterised by a space-saving, low-profile housing and can be used wherever a large number of cables have to be connected in an installation space as small as possible.
Thanks to the simple modular design, a unique plug-in/disconnect point can be configured as a single module consisting of several different connector housings. Each housing can be fitted with up to four different connector inserts. The housings can then be joined together, making an almost unlimited number of module variations possible in terms of individual widths and height. Due to the low-profile housing design, the Module Connect saves a lot of space and enables a high contact density for every application.

Made to measure

Configured as required and harnessed ready for connection

Energy supply systems

1. Select energy chains and cables

Plug connectors

2. Configure suitable inserts

Module Connect

3. Determine housing geometry

Module Connect installation

4. Simply install

Plug in your energy supply with just ONE connector

The connector modules can be adapted to the filling and geometry of the e-chain® in one or more layers. This enables ideal cabling in terms of function and design for every application.
Combining the system with the universal strain relief system from igus® enables secure attachment directly in the connector housing. The soft elements used enclose the cables and hold them securely in place without damaging them. Visually reminiscent of a honeycomb, the flexible structure adapts itself to different cable diameters which provides universal strain relief.
For the Module Connect, there are a variety of application possibilities, such as at the fixed end or moving end of an e-chain®, between two e-chains® or for routing cables into terminal boxes or switch cabinets.

Module Connect Variable shapes and sizes can be individually combined
Module Connect Simplification of machines and system cabling from the motor to the switch cabinet

Six good reasons for Module Connect


Flexible ...

Mounting bracket for wall and floor installation as well as joint connection

Lightweight and space-saving

Lightweight ... space-saving ...

Fibre-reinforced, high-performance polymer. Weight saving compared to conventional rectangular connectors


Swarf-resistant ...

Various sealing elements adapt to different cable diameters: 3 or 4 cable outlets

Connected in seconds

Connected in seconds ...

Individual housing configurations by combining several assembled connectors: connected in seconds


Safer strain relief ...

Strong and easy to handle due to one-piece, screw-on clamping jaw


Proven ...

Up to 4 HARTING Han Modular inserts per housing, e.g. pneumatics, power, BUS, signal: 100 plug inserts to choose from

Individual interface from the construction kit

Request harnessing

Instead of requiring many plug-in/disconnect points in a limited space, the Module Connect can be configured individually as ONE interface. With the simple modular design, several connector housings are combined to a single module consisting of ONE plug-in/disconnect point.
Module Connect can be adapted to the filling and geometry of your e-chain® and enables ideal cabling in terms of function and design for every application.

Request Module Connect


I would be happy to answer your questions personally

Shipping and consultation

In person:

Monday to Friday from 7 am - 8 pm.
Saturdays from 8 am- 12 pm.