Hennlich OOD | Хенлих ООД
Hennlich OOD | Хенлих ООД
iglidur coating is a tribologically optimised polymer in powder form that can be applied to electrically conductive components using powder coating. Like all iglidur® materials, iglidur® coating powders are tribologically optimised and offer excellent coefficients of friction and wear. This allows you to protect even heavily used surfaces from wear and tear - without using any additional components.
Send us your metallic component. We will coat it for you with our iglidur high-performance polymer and send it back to you.
Order the coating powder directly from our online shop and coat your components yourself.
Extend the service life of your application by reducing friction and wear with our powder coating. The surface serves as a wear layer to protect your component.
Reduce the complexity of your application by coating electrically conductive components with our powder coating. No additional component required.
Our powder coatings can be used in a wide variety of applications. For example, at high temperatures of up to 300°C or when in direct contact with food.
A manufacturer of packaging and processing machines has reduced frictional resistance, improved rigidity, shortened throughput times and increased hygiene standards on a series of machines by applying an iglidur® IC-05 tribo-coating to a sliding carriage.
Since the 60-100 micrometre thin lubricating coating is FDA approved, contact with food is also no problem in this application. The previous rollers made of uncoated metallic material carried the potential risk of contamination of the packaging materials despite regular cleaning of the machine.
For this application, springs were coated with an iglidur coating material and used for guidance of window blinds. The manufacturer was faced with the problem that lubricants did not last over the entire service life of the blinds. So he tested the springs with an iglidur IC-02 coating.Although the springs touched the aluminium housing in the test, the coated spring survived the housing. In addition, there was no noise generation by the springs in the test. Thanks to the coating, the use of grease can now be completely eliminated.
Until now, wear pads made of aluminium and a POM material have been used in this application to prevent the wear of two metal components. Now this customer relies on wear pads coated with iglidur IC-02 high-performance polymers.To ensure that the coated plates withstand the extreme environmental conditions, they have been tested in practice with sand, water and high and low temperatures. The result: the ambient conditions are no problem and the metal components do not wear out.
Our customer, a manufacturer of office chairs, used to use components made of a POM material for the armrests. Since the friction of this material was too high, he decided on an alternative from igus: Moulded aluminium linear guides combined with sliding elements made of iglidur J massively reduced the friction. The customer used to coat the aluminium channels with a clear PTFE colour, which was both expensive and required a long handling time.
So he tested our IC-02 coating powder, which additionally reduced friction and was also more cost effective. The manufacturing process has thus taken a step forward: The components are now coated directly with IC-02 and no subsequent painting is required. The same contractor coats the inside with IC-02 and then paints the outside for a better look.
The white paper Wear protection for every surface? How to increase the service life of your wear-resistant parts covers the following topics, among others:
✅ Functionality and processing
✅ The ideal coating for your application
✅ The iglidur® coating service - How it works
✅ Tips for self-coating
✅ Application examples from the field
The following questions are discussed in the interview:
✅ All materials at a glance
✅ Usage recommendations
✅ Frequently asked questions
Do you have questions regarding our iglidur coating powder? Then take a look at our FAQs. There, we answer questions regarding the topic coating with iglidur materials.