Hennlich OOD | Хенлих ООД
Hennlich OOD | Хенлих ООД
Prostheses and orthopaedic braces are intended to make life easier and increase personal mobility; the requirements they have to meet are correspondingly high. The material must withstand the considerable loads placed on it and not be so heavy that it makes the wearer tired. It must be capable of being used everywhere: during swimming in salt or chlorine water, in sand, at high and low temperatures. It must be ensured that creams and medical products cannot impair the functionality of the material or place undue stress on it. Bearings made of polymers from igus are made for precisely such applications and are ideal for constructions with demanding requirements.
For a long service life during continuous operation
Low coefficient of friction, extremely high abrasion resistance
Suitable for rugged and stainless steel shafts
iglidur materials as round bars, tubes and plates
Currently 25 iglidur materials to choose from
Cut to required size without offcut removal
Machining with no minimum order quantity
In required design and material, no minimum order quantity
Suitable for prototypes as well as small and high volume production
Large selection of high-performance materials
See for yourself how to improve technology and reduce costs in sports equipment. Either order our free sample boxes for plain bearing and linear technology or submit a request for a part in your desired shape, quantity or material.
iglidur Z bearings ensure maintenance-free, extremely durable bearing points with excellent dampening on the main axes of this hip prosthesis. The resulting forces occurring in the prosthesis during oscillating movement are reliably transmitted by the bearings without any noticeable increase in play. Tests in the igus test laboratory have shown: iglidur material used for this purpose exhibits 95% less wear than PA66 and PTFE.
High requirements placed on plain bearings in finger and hand prostheses. They must have a low coefficient of friction, require no additional lubrication, be usable for soft shafts and be vibration-dampening and resistant to chemicals. At the same time, they should enable a functional and aesthetic design. All axes involved in the movement were therefore equipped with iglidur J bearings.
This joint prosthesis has been equipped with iglidur J piston rings, which can be clipped to the piston due to their opening and flexible material. This makes the installation very easy and decreases assembly time. Previously, PTFE guide bands were used on the pistons, but they wear a lot faster and therefore have to be replaced more frequently.
All products are tested for wear and durability under real-life conditions in the igus test laboratory, the largest in the industry. The results are entered into our tools to calculate service life and allow for precise predictions regarding their durability.
Upon request, igus carries out customer tests to check product use under completely tailored conditions.
Important information on our products and services for prostheses & ortheses.
Polymer solutions for X-ray robots, laboratory equipment, wheelchairs, medical furniture, ...
Monday to Friday from 7 am - 8 pm.Saturdays from 8 am- 12 pm.