iglidur® Q290 - material data

Table of contents

The most important specifications at a glance

Descriptive technical specifications
Wear resistance at +23°C- 🟧 🟧 🟧 🟧 ⬜️ +More information on wear resistance
Wear resistance at +90°C- 🟧 🟧 🟧 ⬜️ ⬜️ +
Wear resistance at +150°C- 🟧 🟧 ⬜️ ⬜️ ⬜️ +
Slide property- 🟧 🟧 🟧 🟧 ⬜️ +Coefficient of friction, dynamic, against steel, dry: 0.14 - 0.26
Wear resistance under water- 🟧 ⬜️ ⬜️ ⬜️ ⬜️ +
Media resistance- 🟧 🟧 🟧 ⬜️ ⬜️ +More information on media resistance
Resistant to edge pressures- 🟧 🟧 🟧 🟧 🟧 +
Resistant to shock and impact loads- 🟧 🟧 🟧 🟧 🟧 +
Dirt resistance- 🟧 🟧 🟧 🟧 🟧 +

When do I use this material?

  • When a long-lasting plain bearing is required for tough operating conditions (agricultural equipment, construction machinery, etc.) with medium to high dynamic loads on "soft" shafts
  • Ideal for soft shafts
  • Suitable for high edge pressures

When do I use a different material?

Temperatures

min. application temperatureUpper application temperature, long-termUpper application temperature, short-termIn addition secure axially from
-40°C+140°C+180°C+80°C

Permissible surface speeds

Maximum surface speeds [m/s]RotatingOscillatinglinear
Long-term0.80.61.0
Short-term2.01.42.0

Permissible pv values

iglidur Q290 diagram with a descending curve on logarithmic X and Y axes.

Mechanical properties

Friction and wear

iglidur Q290dryGreasesOilWater
Coefficient of friction μ0.14 - 0.260.090.040.04

Shaft materials

Bar chart with values from A to G, highest at B and E and lowest at A and D.
Wear diagram: curve A rises sharply to 240, while B stays nearly constant at around 40.
Chart showing wear during pivoting movements with three bars.

Chemical resistance

MediumResistance
Alcohols+ up to 0
Greases, oils without additives+
Hydrocarbons+
Fuels+
Strong alkalines+ up to 0
Strong acids-
Diluted alkalines+
Diluted acids0 to -

Moisture absorption

Installation tolerances

Diameter d1 [mm]Housing H7 [mm]iglidur Q290 plain bearing E10 [mm]Shaft h9 [mm]
up to 3+0.000 +0.010+0.014 +0.054-0.025 +0.000
> 3 up to 6+0.000 +0.012+0.020 +0.068-0.030 +0.000
> 6 up to 10+0.000 +0.015+0.025 +0.083-0.036 +0.000
> 10 up to 18+0.000 +0.018+0.032 +0.102-0.043 +0.000
> 18 up to 30+0.000 +0.021+0.040 +0.124-0.052 +0.000
> 30 up to 50+0.000 +0.025+0.050 +0.150 -0.062 +0.000
>50 to 80+0.000 +0.030+0.060 +0.180-0.074 +0.000
>80 to 120+0.000 +0.035+0.072 +0.212-0.087 +0.000
> 120 up to 180+0.000 +0.040+0.085 +0.245-0.100 +0.000

Thermal conductivity

Coefficient of thermal expansion

Compressive strength

Vacuum

Radioactive radiation

Typical application areas

Combine harvester in a grain field.

Agricultural engineering

Dump truck with marked bearing points and iglidur Q2E for heavy machinery.

Construction vehicles

Truck with deployed tail lift and visible equipment for patient transport.

Commercial vehicles

Consulting

I look forward to answering your questions

Hennlich OOD | Хенлих ООД+359 32 621929Write e-mail

Shipping and consultation