iglidur® J200 - Material data

Material data table

General properties Unitiglidur® J200 Testing method
Densityg/cm³ 1.72
Colour dark grey
Max. moisture absorption at +23°C/50% room humidity % weight 0.2 DIN 53495
Max. moisture absorption % weight 0.7
Coefficient of sliding friction, dynamic against steel μ0,11-0,17
pv value, max. (dry) MPa x m/s 0.30
Mechanical properties
Flexural modulus MPa2800DIN 53457
Flexural strength at 20°C MPa 58DIN 53452
Compressive strength MPa 43
Maximum recommended surface pressure (20°C) MPa 23
Shore D hardness 70 DIN 53505
Physical and thermal properties
Max. long-term application temperature °C +90
Max. short-term application temperature °C +120
Max. short-term ambient temperature1)°C +140
min. application temperature°C -50
Thermal conductivity W/m x K 0.24 ASTM C 177
Coefficient of thermal expansion (at 23°C) K-1 x 10-5 8 DIN 53752
Electrical properties
Specific transitional resistance Ωcm > 108DIN IEC 93
Surface resistance Ω> 108DIN 53482
Chart with logarithmic axes: a yellow line drops sharply after a short flat section.
Chart with logarithmic axes: a yellow line drops sharply after a short flat section.
Chart with a declining curve on the X and Y axes.

Mechanical specification

Chart with two rising lines for +23 °C and +60 °C on the X-axis up to 24.

Permissible sliding speeds

Maximum surface speed

m/s Rotating Oscillating linear
permanent 10.710
Short-term 1.5 1.1 15

Temperatures

iglidur® J200 Application temperature
Minimum - 50 °C
Max. long-term +90°C
Maximum, short-term +120°C
In addition secure axially from +60°C
Chart with a slightly rising line on the X and Y axes.

Friction and wear

iglidur® J200 dryGreases OilWater
Coefficients of friction µ 0,11 - 0,17 0.09 0.04 0.04
The curve in the graph declines slightly from about 0.16 to 0.10 as X goes from 0 to 20.
Graph with two curves A and B: A rises linearly, B rises exponentially.

Chemical resistance

Medium Resistance
Alcohols+
Hydrocarbons+
Greases, oils without additives +
Fuels +
Diluted acids 0 to -
Strong acids -
Diluted alkalines +
Strong alkalines + up to 0

Chemical resistance

Radioactive radiation

UV resistance

Vacuum

product range

Electrical properties

Electrical properties
Specific transitional resistance> 108 Ωcm
Surface resistance > 108 Ω

Moisture absorption

Maximum moisture absorption
at +23 °C/50 % r. humidity 0.2% weight
Max. moisture absorption 0.7% weight
Chart with a line rising linearly for X and Y.
Chart with a line rising linearly for X and Y.

Installation tolerances

Diameter d1 [mm]Shaft h9 [mm]iglidur® J200 E10 [mm]Housing H7 [mm]
up to 3 0 - 0.025 +0.014 +0.054 0 +0.010
> 3 up to 6 0 - 0.030 +0.020 +0.068 0 +0.012
> 6 up to 10 0 - 0.036 +0.025 +0.083 0 +0.015
> 10 up to 18 0 - 0.043 +0.032 +0.102 0 +0.018
> 18 up to 30 0 - 0.052 +0.040 +0.124 0 +0.021
> 30 up to 50 0 - 0.062 +0.050 +0.150 0 +0.025
>50 to 80 0 - 0.074 +0.060 +0.180 0 +0.030
>80 to 120 0 - 0.087 +0.072 +0.212 0 +0.035
> 120 up to 180 0 - 0.100 +0.085 +0.245 0 +0.040

Consulting

I look forward to answering your questions

Hennlich OOD | Хенлих ООД+359 32 621929Write e-mail

Shipping and consultation