My contact person
Select location

iglidur® J260, sleeve bearing with flange, mm

  • Ideal for plastic shafts
  • Very good c. o. f. for low or medium loads
  • Good liquid media resistance
  • Slightly higher temperature rating than iglidur® J
Product description
iglidur® J260 | Ideal for plastic shafts
 
  • Very good coefficient of friction for low or medium loads
  • Good media-resistance
  • Slightly higher temperature rating than iglidur® J
  • Long service life - even on polymer shafts and other special cases
  • Lubrication-free and maintenance-free
  • Standard range from stock
Time and again the iglidur® J260 material proves its worth where the maximum service life and best friction coefficient is required under special application conditions - particularly with plastic shafts! Similar to the classic, iglidur® J, iglidur® J260 is an endurance runner with outstanding wear behaviour but provides increased reserves at its long-term application temperature of +120°C.
 
Typical application areas
 
Vending machinery
Machine tools
Robotics
 
Further applications can be found here:
Industry solutions
 
When to use it?
  • When polymer shafts are used
  • When the temperature rating of iglidur® J is not sufficient
  • If a bearing with a good coefficient of friction is required
  • When high wear resistance is required at medium loads
  • When good liquid media resistance is required
When not to use it?
Use our filter options to find the suitable product 
 
Tolerances and measuring system
The installation height and tolerances of iglidur® plain bearings are dependent on the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are decisive factors. Plain bearings with low moisture absorption can be designed with a minimal bearing clearance. The rule of thumb for wall thickness: the thicker the wall of the bearings, the larger the clearances must be.
Testing methods
 
Assembly
iglidur® plain bearings are press-fit bearings. The inner diameter adjusts only after press-fitting into the correctly toleranced housing hole. The press-fit interference can be up to 2% of the inner diameter. This ensures that the bearing is securely press-fitted. Axial or radial movement in the housing are also prevented in this way.
iglidur® - assembling, gluing, machining
 
Certificates and standards
RoHS compliant<br>According to 2011/65/EU (RoHS 2)
Technical data
Accessories
Downloads

Consulting

I would be happy to answer your questions personally

Shipping and consultation

In person:

Monday to Friday from 7 am - 8 pm.
Saturdays from 8 am- 12 pm.

Online:

24h